Author Topic: New grey component to the usual green waveform  (Read 3195 times)

jasustar

  • Contributor
  • *
  • Posts: 6
New grey component to the usual green waveform
« on: January 02, 2013, 01:04:36 am »
After using your truly magnificent product for well over a year, I've encountered something for which I can't find an explanation in the documentation.

After successfully digitizing  an LP, I noticed that the waveform, which is normally represented in bright green, suddenly also ha a grey component.

Attached you will find a screen shot of the problem I am encountering.
John Schuster
jasustar@yahoo.com

Paul Sanders (AlpineSoft)

  • Administrator
  • Staff
  • *****
  • Posts: 1291
    • AlpineSoft Main Website
Re: New grey component to the usual green waveform
« Reply #1 on: January 02, 2013, 09:47:11 am »
Hi,

Did you scan the recording for clicks?  The grey line is the waveform before click scanning and the green line is the waveform after.  In this case, it looks like VinylStudio might have somehow picked up an old, stale click repair file by mistake.  Try right-clicking in the waveform display and selecting 'Remove Corrections'.