AlpineSoft Support Forums

Forum List => Technical Support => Topic started by: jasustar on January 02, 2013, 01:04:36 AM

Title: New grey component to the usual green waveform
Post by: jasustar on January 02, 2013, 01:04:36 AM
After using your truly magnificent product for well over a year, I've encountered something for which I can't find an explanation in the documentation.

After successfully digitizing  an LP, I noticed that the waveform, which is normally represented in bright green, suddenly also ha a grey component.

Attached you will find a screen shot of the problem I am encountering.
Title: Re: New grey component to the usual green waveform
Post by: Paul Sanders (AlpineSoft) on January 02, 2013, 09:47:11 AM
Hi,

Did you scan the recording for clicks?  The grey line is the waveform before click scanning and the green line is the waveform after.  In this case, it looks like VinylStudio might have somehow picked up an old, stale click repair file by mistake.  Try right-clicking in the waveform display and selecting 'Remove Corrections'.