AlpineSoft Support Forums

Forum List => Technical Support => Topic started by: Boreal on December 01, 2013, 05:28:19 PM

Title: Sine wave in home tape
Post by: Boreal on December 01, 2013, 05:28:19 PM
Hi. Attached is an old home tape recording on a cheap recorder with cheap mikes. If one looks at the wavefile they will notice a sine wave, especially in the left (lower) channel. Can anyone tell me where that comes from? Is there a way to avoid it. Is it a type of rumble from the recorder capstan? Just wondering if anyone knows the source. Thanks.

Also, is there a way to copy a "Print Screen" image directly into a post? I couldn't figure out how to do it.

Boreal
Title: Re: Sine wave in home tape
Post by: Paul Sanders (AlpineSoft) on December 01, 2013, 06:21:52 PM
Hi,

I'm not sure what it is but I imagine it's on the tape so getting rid of it will be tricky.  It's not rumble, the frequency's too high, and tapes don't suffer from that anyway.  Try the hiss filter, see what effect that has, although the result might sound a bit artificial with that level of background noise.

There isn't a way to insert an image directly into a post, no.  You have to upload it as an attachment (as you did).  It's a limitation of the forum software we use, sorry.
Title: Re: Sine wave in home tape
Post by: Boreal on December 01, 2013, 06:40:33 PM
Oh, I don't need to get rid of it, as it's a crappy recording. I was just wondering what it may be. I was using two microphones fairly close to one another recording an acoustic guitar and voice. Since I wasn't using a monitor, I don't see that it could be feedback, unless it was internal in the system. Maybe the mics were picking up the sound of the tape deck motors.

I didn't mean to take up your time. I thought maybe someone would recognize it and satisfy my curiosity.