Print Page - Speed conversion no longer works

Title: Speed conversion no longer works
Post by: lfruchtm on December 20, 2021, 01:53:38 AM

I'm attempting to digitize a 78 rpm record, using the speed conversion feature, with the turntable set at 45 rpm, as suggested. Speed conversion is enabled, but does not have any effect. I had succeeded previously in using this feature, but it no longer works. I'm on a MacBook Pro with the latest Apple chip and acquired the software through the website. any suggestions would be welcome.

Title: Re: Speed conversion no longer works
Post by: Paul Sanders (AlpineSoft) on December 20, 2021, 07:05:25 AM

Hi,

I just retested this (including under Monterey) and found no problems. Um, you do know what you won't hear the effects while recording, right? Only when subsequently playing back the recorded file...

Also, I did reply to your original email on this subject, please check your SPAM folder.

Title: Re: Speed conversion no longer works
Post by: lfruchtm on December 21, 2021, 02:17:37 AM

Thank you. I did not realize that the conversion was not audible during recording. separately, how do I navigate to the hum and hiss filters?

Title: Re: Speed conversion no longer works
Post by: Paul Sanders (AlpineSoft) on December 21, 2021, 08:36:39 AM

Hi,

You're looking for the 'Adjust Filter Settings' button in the toolbar beneath the waveform display in the Cleanup Audio window. Mouse over the buttons for a description of what they do.

AlpineSoft Support Forums

Forum List => Technical Support => Topic started by: lfruchtm on December 20, 2021, 01:53:38 AM